Add to ORKGThis study reports the investiga-tion of high-entropy coatings obtained by electron-beam cladding in vacuum of Al-Co-Ni-Fe-Cr-Ti-Bx powder blend on a steel substrate. The hardness of high entropy AlNiCoFeCrTiBX coatings is much higher than that of the initial components and than the one of the steel substrate, and is much higher than that of the similar alloys prepared by laser cladding. It is shown that yield strength increases by 2,94 GPa to 4,54 GPa due to boron addition
Through laser metal deposition, attempts were made to coat AlCoCrFeNi, a high-entropy alloy (HEA), o...
Using a focused ion beam TTX-NHT3 Nanoindentation tester with a load of 500 mN, we study the microme...
High entropy alloys (HEAs) represent a new class of materials that present novel phase structures an...
This is a post-peer-review, pre-copyedit version of an article published in "A. D. Pogrebnjak and O....
AbstractHigh-entropy alloys have been found to have novel microstructures and unique properties. The...
High-entropy alloys (HEAs) are novel solid solution strengthening metallic materials, some of which ...
The group of high entropy alloys (HEA) is under increasing interest due to the wide possibility of t...
The application of high-entropy alloys (HEAs) as coating materials has become an active research top...
In this study, a high-entropy alloy (HEA) of Al–Co–Cr–Fe–Ni system was fabricated via wire-arc addit...
High entropy alloys are multicomponent alloys that have at least five different principal elements a...
This paper studies the microstructure, composition and properties of a Al0.25CoCrFeNiV high entropy ...
FeCrNiCoCuAlx (x=0, 1, 2, 3) high-entropy alloy (HEA) coatings were prepared on Q345 steel by laser ...
In order to improve the wear properties of FeCoCrNi high entropy alloy (HEA), laser cladding was app...
In this work, the CoCrFeNiNbx (x: molar ratio, x = 0.45, 0.5, 0.75, and 1.0) high entropy alloy coat...
The purpose of this work was to develop methods for obtaining composite coatings based on high-entro...
Through laser metal deposition, attempts were made to coat AlCoCrFeNi, a high-entropy alloy (HEA), o...
Using a focused ion beam TTX-NHT3 Nanoindentation tester with a load of 500 mN, we study the microme...
High entropy alloys (HEAs) represent a new class of materials that present novel phase structures an...
This is a post-peer-review, pre-copyedit version of an article published in "A. D. Pogrebnjak and O....
AbstractHigh-entropy alloys have been found to have novel microstructures and unique properties. The...
High-entropy alloys (HEAs) are novel solid solution strengthening metallic materials, some of which ...
The group of high entropy alloys (HEA) is under increasing interest due to the wide possibility of t...
The application of high-entropy alloys (HEAs) as coating materials has become an active research top...
In this study, a high-entropy alloy (HEA) of Al–Co–Cr–Fe–Ni system was fabricated via wire-arc addit...
High entropy alloys are multicomponent alloys that have at least five different principal elements a...
This paper studies the microstructure, composition and properties of a Al0.25CoCrFeNiV high entropy ...
FeCrNiCoCuAlx (x=0, 1, 2, 3) high-entropy alloy (HEA) coatings were prepared on Q345 steel by laser ...
In order to improve the wear properties of FeCoCrNi high entropy alloy (HEA), laser cladding was app...
In this work, the CoCrFeNiNbx (x: molar ratio, x = 0.45, 0.5, 0.75, and 1.0) high entropy alloy coat...
The purpose of this work was to develop methods for obtaining composite coatings based on high-entro...
Through laser metal deposition, attempts were made to coat AlCoCrFeNi, a high-entropy alloy (HEA), o...
Using a focused ion beam TTX-NHT3 Nanoindentation tester with a load of 500 mN, we study the microme...
High entropy alloys (HEAs) represent a new class of materials that present novel phase structures an...